Lightning strike counter calibrator usage notes seven points

Lightning strike counter calibrator Usage Notice Seven points 1. Charge before use, in order to ensure the charging effect and prolong the battery life, you need to use a special charger. Empty battery to full Requires 3-4 hours, red light on the charger Light indicates charging; Green light indicates charging is complete. Before use, plug in the attached ground wire plug at the end and ground wire to ground.

2. According to the counter installation height, pull out the telescopic discharge pole properly.

3. Press the red button, turn on the high voltage for about 1 second, the indicator light (micro-flash), you can gently click the counter and the arrester connection for testing.

4. After each click, the end of the discharge rod should leave the counter. If you need to repeat the test, you do not have to release the button. When the indicator light flashes again after 1-2 seconds, you can click the test again.

5. Continuous test will cause the tester to heat, please pay attention to the appropriate interval time.

6. If the indicator light is still not flashing after pressing the button for more than 3 seconds, it means that the battery needs to be charged.

7. Do not disassemble the calibrator. If the battery capacity drops significantly or the charging efficiency is too low, you need to change. Please purchase a dedicated battery pack from the company.

Note: No part of the body can touch the electrode part when the indicator light is bright (micro-flashing), otherwise there is a danger of electric shock.
Lightning counter calibrator Usage method 1. Charge before use, in order to ensure the charging effect and extend the battery life, you need to use a special charger. Empty battery to full Requires 3-4 hours, the red light on the charger indicates Charging; The green light indicates that the charging is complete. Before use, plug in the attached grounding plug at the end, and the grounding clamps the ground.

2. According to the counter installation height, pull out the telescopic discharge pole properly.

3. Press the red button, turn on the high voltage for about 1 second, the indicator light (micro-flash), you can gently click the counter and the arrester connection for testing.

4. After each click, the end of the discharge rod should leave the counter. If you need to repeat the test, you do not have to release the button. When the indicator light flashes again after 1-2 seconds, you can click the test again.

5. Continuous test will cause the tester to heat, please pay attention to the appropriate interval.

6. If the indicator light is still not flashing after pressing the button for more than 3 seconds, it means that the battery needs to be charged.

7. Do not disassemble the calibrator. If the battery capacity drops significantly or the charging efficiency is too low, you need to change. Please purchase a dedicated battery pack from the company.

Note: No part of the body can touch the electrode part when the indicator light is bright (micro-flashing), otherwise there is a danger of electric shock.

Zbs Clevise is Link Fitting. Link fitting is used for insulators, Suspension Clamp, clamp and protection fittings connected to form a suspension or tension string set of fittings.

ZBS Clevises are used to attach clevis tongue insulators to various associated hardware within an insulator string.

ZBS Clevise is widely used to connect insulator & insulator, or connect insulator and ground wire clamp to tower arms or subjection structures. The cotter pin are stainless steel, the other parts are hot-dip galvanized steel. 

ZBS Clevise

 

ZBS Clevise

ZBS Clevise

 

 

 

If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.

 

ZBS Clevise

Zbs Clevise,Zbs Type Clevise,Link Fitting Zbs Clevise,Zbs Clevis For Overhead Line Accessories

Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be