How to do the sink leaking water sink installation is the hub

Sink rust stains, water leaks in the sink, etc., seriously affect the daily normal home, then how to do the water leaking? Many small partners directly to the repairman to come over, or simply update. But in fact, the root cause of water leakage in the sink is inseparable from the installation of the sink. We must find the key points to solve the problem better!

1, the sink is installed in the kitchen renovation

The installation of the sink should be left at the end of the kitchen renovation. The installation of the sink is not a big project. Prepare the sink for the prepared items and install them. After the sink is ready, install the installer directly.

2. The water pipe must be drained during installation.

It is necessary to drain the water from the water pipe before installing the water tank. If the water of the water pipe is not drained during installation, it will cause water leakage and rust in the water tank in the future.

3, the faucet must be firm when installed

This point is very important for everyone to pay attention to, when installing the sink must pay attention to the firmness of the joint, but also pay attention to the location of the hot and cold water pipes, do not make a mistake. If the installation is not strong, there will be gaps near the sink, causing water leakage.

4, need to be cleaned after installation

The sink must be cleaned after the installation is completed, and the debris during installation should be thoroughly rinsed. In addition, the smudges that are easy to see in the daily sink can be treated like this. The sink should be cleaned with warm water, washing liquid and soft cloth after use. The usual stains can be removed immediately; the usual stains such as garbage and cream are slightly polluted and should not be used. Use a strong detergent to clean; foods that easily contaminate the sink, such as tea, coffee, juice, etc., should be washed immediately with water or detergent to prevent alkaline deposits from remaining in the sink. [Follow the WeChat public number "Jiuzheng bathroom net"; attention to surprises, scan code view: how to let customers order a minute in the bathroom guide? Jiuzheng bathroom network exchange group]

A treatment plant for lake Kinneret water, comprising treatment by two filtration steps, flocculation and disinfection with chlorine dioxide, was studied with a view to evaluating the effect of ClO2 disinfection on drinking water quality and determining the optimal mode of operation for the treatment plant. Four modes of operation were studied and the optimal mode was defined as that in which the flocculant (aluminium sulphate) was introduced before the first, and ClO2 after the second, filtration. The finished water contained a residue of approx. 0.2 mgl−1 ClO2, approx. 0.35 mgl−1ClO2− and low concentrations of suspended matter (1.5 mgl−1) and of chlorophyll (0.1 μgl−1). Trihalomethane concentrations were negligible, and the bacteriological quality of the water was within the health authorities' requirements. It was shown that disinfection of treated water (after flocculation and filtration) was much more effective than that of raw water. Furthermore, disinfection in the optimal mode prevents accumulation of high chlorite concentrations leaving a residue of ClO2.

*Related Products:water cleaner chemical clo2.

Industrial Water Disinfection

Chlorine Dioxide For Brewery Factory, Chlorine Dioxide For Paper Bleach, Chlorine Dioxide For Beverage Factory, Cooling Water Treatment

Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. ,