Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM

Model NO.: custom
Structure: Piston Type
Material: Stainless Steel
Color: Red
Size: Could Be Customized as Per Your Requirements
Trademark: DALLAST
Transport Package: Carton Box
Specification: could be designed according to your requirement
Origin: Shandong
HS Code: 8412210000
Model NO.: custom
Structure: Piston Type
Material: Stainless Steel
Color: Red
Size: Could Be Customized as Per Your Requirements
Trademark: DALLAST
Transport Package: Carton Box
Specification: could be designed according to your requirement
Origin: Shandong
HS Code: 8412210000

Specifications:
  bore diameter: 100mm
  rod dia: 60mm
  stroke: 300mm
  length mounting both end clevies.

Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM
 

Production description:
A hydraulic cylinder consists of a piston sliding within a hollow tube, moved by the pressure of a liquid. The piston, or rod is usually machined.
Double-acting models have tapped holes at both ends for the introduction and evacuation of the hydraulic fluid. This allows the piston to apply force in both directions.
 

Installation method:
The most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application's requirements.

 

Piston Seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
 

About piston rod:

High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
 



Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM

 Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM
Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM

    


Application:       

Application Various  Machinery
Material of cylinder tube Alloy steel, Stainless steel, Carbon steel, 27SIMN and so on
Coating All tubes are chrome plated
Working pressure 10MPa-30MPa
Bore size 40mm-255mm
Color  Any color, if you needed
Mouting Type  Earring-tunnion, double tunnion, double earring (eye end)
Plunger 20#, 45# steel with high frequency quenching
Certification ISO9001:2008, SGS, TS16949
Warranty One year
Working temperature

-30° C to 80°C

Stroke 100-2500mm
Package Shrink film, pallet, plywood case, carton box
Main export market    USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore
payment terms  T/T, L/C, D/A, D/P AND SO ON
Delivery time 30 days after down payment

 

Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.





Certification
   Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM





                      




FAQ:
 

1.Are you a manufacturer?

We are professional manufacturer in hydraulic. We will provide competitive price.

2.What is your warranty?

Our products are all available for one-year free warranty and product lifetime consulting service.

3.How to ship your products?

We are transported by sea, by air or by international express.

4. Do you support OEM service?

Yes. OEM service is available.

5. Is your design reasonable?

We have professional R&D team with rich design experience.






 

 

 

Specifications:
  bore diameter: 100mm
  rod dia: 60mm
  stroke: 300mm
  length mounting both end clevies.

Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM
 

Production description:
A hydraulic cylinder consists of a piston sliding within a hollow tube, moved by the pressure of a liquid. The piston, or rod is usually machined.
Double-acting models have tapped holes at both ends for the introduction and evacuation of the hydraulic fluid. This allows the piston to apply force in both directions.
 

Installation method:
The most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application's requirements.

 

Piston Seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
 

About piston rod:

High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
 



Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM

 Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM
Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM

    


Application:       

Application Various  Machinery
Material of cylinder tube Alloy steel, Stainless steel, Carbon steel, 27SIMN and so on
Coating All tubes are chrome plated
Working pressure 10MPa-30MPa
Bore size 40mm-255mm
Color  Any color, if you needed
Mouting Type  Earring-tunnion, double tunnion, double earring (eye end)
Plunger 20#, 45# steel with high frequency quenching
Certification ISO9001:2008, SGS, TS16949
Warranty One year
Working temperature

-30° C to 80°C

Stroke 100-2500mm
Package Shrink film, pallet, plywood case, carton box
Main export market    USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore
payment terms  T/T, L/C, D/A, D/P AND SO ON
Delivery time 30 days after down payment

 

Any types of Engineering Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.





Certification
   Hydraulic Cylinders Welded Double End Clevis Mounting Type/Hydraulic RAM





                      




FAQ:
 

1.Are you a manufacturer?

We are professional manufacturer in hydraulic. We will provide competitive price.

2.What is your warranty?

Our products are all available for one-year free warranty and product lifetime consulting service.

3.How to ship your products?

We are transported by sea, by air or by international express.

4. Do you support OEM service?

Yes. OEM service is available.

5. Is your design reasonable?

We have professional R&D team with rich design experience.






 

 

 

Collectible Knife

Damascus Steel Pocket Knife,Damascus Steel Hunting Knife,Keychain Pocket Knife,Damascus Folding Knife

YangJiang Junxiong Trading & Industry Company Co.,Ltd , https://www.cn-sundo.com